Hey guys,
I feel like this is a stupid question with a simple solution, but I just
not see it:
When I configure a new BGP session, before I can shutdown the neighbor
or apply a specific peer-group/session-template/policy-template, I need
to configure the remote-as, so the first command in the address-family is:
neighbor 2001::123 remote-as 65005
Now, if I don't specify the policies right away, or shutdown the session
right away (or the ssh terminal slows down for whatever reason), IOS will
establish the BGP session as-is (without any policies), until I manage
to configure the rest.
In that case, I'm leaking everything I have to the other side for a short
period of time, possibly triggering max-prefix limits or causing other
nastiness.
Especially when using SSH and configuring long IPv6 addresses on IOS-XE
here, this seams to be a problem, copy'n'pasting from notepad is not
enough in that situation (somehow, the terminal slows down when pasting
the config to some 2 - 3 chars per second).
Any way to make IOS(-XE) behave in a more sane way so I can configure
everything *before* the session brought up? Like defaulting to shutdown
or something like that?
Let me know how you guys avoid this problem.
Thanks!
Lukas
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
