No, I want to use EFM. This is the actual interface configuration: controller SHDSL 0/1/0 dsl-group pairs 0, 1, 2, 3 efm-bond ! interface Ethernet0/1/0 no ip address ! Regards
De : Peter Persson [mailto:[email protected]] Envoyé : lundi 7 juillet 2014 09:27 À : Ruddy RAMOTHE Cc : [email protected] Objet : Re: [c-nsp] Configure 802.1Q on HWIC-4SHDSL-E I might be wrong, but isnt SHDSL based on VFI/VC? Regards, Peter 2014-07-07 14:44 GMT+02:00 Ruddy RAMOTHE <[email protected]<mailto:[email protected]>>: Hi I would like to know how to configure 802.1Q on the interface HWIC-4SHDSL-E, Is it mandatory to bridge with an LAN Interface ? The Card is on a Cisco1841 platform. Regards. Ruddy _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
