On 07/07/14 16:08, Ruddy RAMOTHE wrote:
For configuring EFM, I have to configure an Ethernet Interface, associated to
the SHDSL Interface.
After I created a sub Ethernet Interface with the dot1Q encapsulation. That's
Work !
controller SHDSL 0/1/0
dsl-group pairs 0, 1, 2, 3 efm-bond
!
interface Ethernet0/1/0
no ip address
!
interface Ethernet0/1/0.10
encapsulation dot1Q 10
ip address 10.0.10.1 255.255.255.0
Surprisingly simple! Slightly off-topic, but in which country are you
buying wires-only EFM? All EFM from providers here in the UK (that I've
seen) will demand their own NTE.
Tom
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
