I have a Cisco 7206 with a Gigabit Ethernet card in it. I’m getting what I
think is anomalous behavior, but I’m not sure.
7206, NPE-400
Slot 1:
Gigabit Ethernet Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 13:47:46 ago
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision A0
Serial number 24455260 Part number 73-3144-04
FRU Part Number: PA-1GE=
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
The card has an adapter that plugs into it that adapts it for gig copper. The
thing is, it shows a link light and up/up from the moment the adapter is
plugged in, regardless of whether or not a cable is plugged into the adapter.
Is this normal behavior, or an indication that something is wrong with the
adapter or card?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
