AFAIK to terminate into layer 3 you'll have to pop both tags: service instance 10 ethernet encapsulation dot1q 1048 second-dot1q 1058 rewrite ingress tag pop 2 symmetric bridge-domain 1058
kind regards Pshem On 9 August 2014 05:40, Jason Lixfeld <[email protected]> wrote: > You don't need to specify vlan 1048. With flexible Ethernet (service > instance), all VLANs are locally significant (unless you need to trunk them > northbound towards your core (presuming you have a VLAN-centric core and > not an MPLS core. My example implies the latter)). > > I think you probably need to specify the second-dot1q (or whatever it's > called) command for the range of inner tags. > > Here's an example (I haven't dropped this on a box, so I don't know if > it's correct syntax): > > ! > interface GigabitEthernet0/6 > description Windstream VLS IP.LVXX.xxxxxx..WCI.001 > port-type nni > switchport trunk allowed vlan none > switchport mode trunk > service instance 10 ethernet > encapsulation dot1q 1048 second-dot1q 1058 > rewrite ingress tag pop 1 symmetric > bridge-domain 1058 > service instance 20 ethernet > encapsulation dot1q 1048 second-dot1q 1059-1098 > rewrite ingress tag pop 1 symmetric > xconnect 1.1.1.1 69 encapsulation mpls > ! > interface Vlan1058 > description WINDSTREAM-HOBBS > ip address xxx.xx.xx.1 255.255.255.0 > ! > > On Aug 8, 2014, at 12:17 PM, james edwards <[email protected]> > wrote: > > > I am trying to configure an interface on a ME3600 to accept Q in Q > > from a provider. The p-vlan the provider is using is 1048 and they are > > carrying customer vlans (c-vlan) 1058-1098, one from each site. I'm > > new to the 3600 and have not done Q in Q on it yet. I've worked up > > this much of the config but it does not seem right. Can anyone give me > > some pointers or links to help me along ? I've only got one customer > > site configed, there will be 14. > > > > > > ! > > vlan 1048 > > name WINDSTREAM > > ! > > vlan 1058 > > name WINDSTREAM-HOBBS > > ! > > interface GigabitEthernet0/6 > > description Windstream VLS IP.LVXX.xxxxxx..WCI.001 > > port-type nni > > switchport trunk allowed vlan none > > switchport mode trunk > > service instance 10 ethernet > > encapsulation dot1q 1048 > > rewrite ingress tag pop 1 symmetric > > bridge-domain 10 > > ! > > ! > > interface Vlan1048 > > description Windstream VLS > > no ip address > > ! > > interface Vlan1058 > > description WINDSTREAM-HOBBS > > ip address xxx.xx.xx.1 255.255.255.0 > > > > > > > > Thanks, > > > > James > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
