On 08/13/2014 12:11 AM, Lukas Tribus wrote:
A related question - can the 1002 with RP1 be upgraded with third party
memory? Mine has 4g on it but before I roll into production if there's a
cheap upgrade, might as well do it.
Nope, RP1's memory can't be upgraded, it think because the CPU is 32bit.
32bit also means less memory consumption compared to 64bit.
I have RP1's running the full table in a MPLS VPN and they don't have
any problems currently, but I'm not really comfortable anymore with
this config. I would suggest RP2 if you run with the full bgp table.
How many routes do you have then and how much memory left over? I have
been thinking about taking 2 full bgp feeds but am unsure what that
would do memory wise.
Mike-
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
