On Wed, 3 Sep 2014, Joseph Mays wrote:
I have a cisco 7206 VXR with NPE-400 running c7200-ik9su2-mz.123-23.bin. I have an NPE-G1 card now that I would like to put in the router instead. Can I just swap the NPE-400 for the G1 card and expect it to work? I’m attaching the show ver on the NPE-400 system showing the bootloader, IOS, etc.
You might need to move the configurations for some interfaces if you plan on using the built-in GE interfaces on the NPE-G1. Also, IIRC, the NPE-G1 runs different code than the older NPEs, so you will need to make sure that the NPE-G1 code has the same set of features as the NPE-400 code.
jms _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
