HI, On Wed, Sep 03, 2014 at 02:51:17PM -0400, Justin M. Streiner wrote: > You might need to move the configurations for some interfaces if you plan > on using the built-in GE interfaces on the NPE-G1. Also, IIRC, the NPE-G1 > runs different code than the older NPEs, so you will need to make sure > that the NPE-G1 code has the same set of features as the NPE-400 code.
NPE-G1 is fine. G2 is the one with the different CPU and "p" images.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpIyslLYqjRu.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
