Also, Inter-area TE is not supported. Thanks, Ramji
-----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Ramji Vasudevan (ramji) Sent: Monday, September 08, 2014 8:35 AM To: Waris Sagheer (waris); James Bensley; [email protected] Cc: Wade Hai Jin (jhai) Subject: Re: [c-nsp] MPLS-TE on ME3600 Waris, James, MPLS TE over SVI is not supported. Will look into the documentation and correct appropriately. Thanks, Ramji From: Waris Sagheer (waris) Sent: Sunday, September 07, 2014 3:55 AM To: James Bensley; [email protected] Cc: Wade Hai Jin (jhai); Ramji Vasudevan (ramji) Subject: Re: [c-nsp] MPLS-TE on ME3600 James, MPLS TE/FRR over Etherchannel is supported since Nov 2013, 15.4(1)S. LDP over MPLS TE on L2VPN is also supported. We need to fix the documentation. Wade and Ramji, Can you please clarify the support for MPLS TE over SVI and Interarea TE support? We need to fix the CCO documentation for MPLS TE. It seems to be creating confusion for customers. Best Regards, [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Access Group (SPAG) [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: James Bensley <[email protected]<mailto:[email protected]>> Date: Friday, September 5, 2014 at 2:10 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [c-nsp] MPLS-TE on ME3600 On 11 September 2013 17:15, Eric Van Tol <[email protected]<mailto:[email protected]>> wrote: Hi all, I'm a bit confused about the documentation for the ME3600 with regard to its MPLS-TE support. Specifically, the 'MPLS TE' section (http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.3_3_S/configuration/guide/swmpls.html#wp1183331) states: The switch does not support these MPLS TE features: *Interarea TE support for OSPF and IS-IS *TE path protection ... "The switch supports MPLS TE fast reroute over only routed ports and not over SVIs or EtherChannels." Hi All, To revive this old thread, I'm building out some MPLS-TE tunnels on 15.3.3S code; Does anyone know if ME3x00's support MPLS-TE FRR over SVIs and EtherChannels yet; Is this in 15.4 or 15.3.3S3? If so I might be able to push for an upgrade. Also I saw this line on that page the ME3600s do have "Support for LDP over TE tunnels for Layer 3 VPN traffic by entering the mpls ip interface configuration command on the tunnel interface. The switch does not support LDP over TE tunnels for Layer 2 VPN traffic" - What happens with L2VPNs in this case? Do the PEs signal seperate PE-to-PE LDP LSPs along side the TE LSPs? Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
