You should see something similar with the ME
#sh license
Index 1 Feature: AdvancedMetroIPAccess
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of
CiscoNSP List
Sent: Thursday, September 11, 2014 8:31 AM
To: Vitkovský Adam; [email protected]
Subject: Re: [c-nsp] ASR1001 and ME3600X licensing
Thanks Guys,
Just checked one of the ASR1001's with sh license - Assume this means it is
enabled?
Index 2 Feature: advipservices
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
sh ver doesnt report anything regarding what licences are installed (Unlike
1921's etc, which report which technology package license is in use, whether
it's permanent or not, and also what it will use next reboot)
Havent checked any of the ME's yet.
> From: [email protected]
> To: [email protected]; [email protected]
> Subject: RE: [c-nsp] ASR1001 and ME3600X licensing
> Date: Wed, 10 Sep 2014 07:22:35 +0000
>
> Hi,
>
> If you ordered it as such the licenses should be preinstalled at least
that's my experience.
> If not you'd have to use the PAK # and serial # to obtain the license file
from Cisco then copy it to the device and install it yourself.
> And yes you can check with sh lic blah blah.
>
>
> adam
> > -----Original Message-----
> > From: cisco-nsp [mailto:[email protected]] On Behalf
> > Of CiscoNSP List
> > Sent: Wednesday, September 10, 2014 8:25 AM
> > To: [email protected]
> > Subject: [c-nsp] ASR1001 and ME3600X licensing
> >
> > Hi Everyone,
> >
> > We have purchased a number of the above devices and also purchased
> > Adv IP(For all the ASR's) and Adv Metro IP for all the ME3600's - We
> > were told a "paper license" was sent for the adv ip(For all ASR's
> > and ME3600's), which we have been unable to locate...a week later of
> > constant e-mails to disty/Cisco AM the disty is now stating that the
> > "licenses" are already installed on all the devices - I dont have
> > physical access to the devices until tomorow, but do you need
> > register the PAK for each device, and then install the license
> > key....or would they have come "pre-installed"? Once I have access to
each device, would sh ver or sh licenses tell me if adv IP was "active"?
> >
> >
> > I cant believe how difficult this has been....and how lacking in
> > knowledge of the licensing both our Disty and Cisco AM have been.
> >
> > Cheers.
> > _______________________________________________
> > cisco-nsp mailing list [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
