Y'all know if this works ? Trying to get ipv6 (6vpe) working on cisco cmts (uBR7246VXR) and arris cable modem TM602G
I have this in my lab currently. I see nd and icmpv6 and various traffic on debug output of cmts as being sent out bundle 1 interface. but I don't see it arrive on the computer hanging off of the ARRIS TM602G cable modem. In the opposite direction, I see the computer (cpe) send neighbor discoveries, and dhcpv6 solicits, but I don't seem to be getting that traffic up at the cmts. V6 works from cmts to internet. just not across rf domain towards modem and cpe. ..from cmts----->to internet Tracing the route to 2600:1404:D:391::90 1 ::FFFF:12.34.0.254 [AS 12345] [MPLS: Labels 16010/16291 Exp 0] 4 msec 2 ::FFFF:12.34.0.3 [AS 12345] [MPLS: Labels 16056/16291 Exp 0] 0 msec 3 ::FFFF:12.34.108.3 [AS 12345] [MPLS: Labels 16046/16291 Exp 0] 0 msec 4 2222:3333:0:8::F:8001 [AS 12345] [MPLS: Label 16291 Exp 0] 4 msec 5 2222:3333:0:8::F:8000 [AS 12345] 0 msec 6 2222:3333:0:4::F:BB56 [AS 12345] 0 msec 7 2222:3333:0:4::F:810C [AS 12345] 4 msec 8 2222:3333:0:4::4:326 [AS 12345] 0 msec 9 2222:3333:0:4::4:10 [AS 12345] 4 msec 10 2222:3333:0:4::34 [AS 12345] 8 msec 11 2222:4444:0:8::A [AS 12345] 8 msec 12 2222:4444:0:4::D5 [AS 12345] 12 msec 13 2222:4444:0:4::1A3 [AS 12345] 12 msec 14 * 15 2600:1404:D::1705:A49B [AS 12345] 8 msec cmts0.test#sh ver | in IOS Cisco IOS Software, 7200 Software (UBR7200P-JK9SU2-M), Version 12.2(33)SCD7, RELEASE SOFTWARE (fc2) cmts0.test#ping vrf one www.cisco.com Sending 5, 100-byte ICMP Echos to 2600:1404:D:387::90, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 8/9/12 ms cmts0.test# _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
