On Fri, 31 Oct 2014, Gert Doering wrote:
Hi,
On Fri, Oct 31, 2014 at 08:51:33AM -0400, Jon Lewis wrote:
AFAIK, the problem is with the removable 1gb DIMMs on the cards...so you
don't have to get spare Sups and line cards...you could just buy a couple
of spare 1gb memory modules for them (if you have hands on-site you trust
to do surgery on a card). Unfortunately, on a card like the 6708, getting
to that memory module is a PITA as it's under the DFC.
Mmmh, this might be worth a try :-) - I'm feeling a bit lazy today - is
there a list of part numbers somewhere (particularily sup720, sup720-10G
and 6704/6708)? Quick googling didn't turn up anhyting useful...
Are you asking about part numbers affected by this defect or part numbers
for the memory modules themselves?
When I contacted one of our parts sources for pricing on spare memory
modules, I was kind of surprised to be told the 1gb module for a Sup720 is
a different part than the same size module for a 6708. I don't know if
they're really not interchangeable or if cisco just slapped different part
numbers on the same modules for different uses.
----------------------------------------------------------------------
Jon Lewis, MCP :) | I route
| therefore you are
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
