Sorry i forgot, the most important servers are ibm mainframes...
Sent with Mobile -------- Messaggio originale -------- Da: Andrew Miehs <[email protected]> Data: A: dim0sal <[email protected]> Cc: [email protected] Oggetto: Re: R: Re: [c-nsp] Best design can fit DC to DC How many physical servers? What operating system/ virtualisation environment? Sent from a mobile device > On 1 Nov 2014, at 17:50, dim0sal <[email protected]> wrote: > > Hi andrew > Indeed i wrote stp isolation, that means to keep stp inside each dc. > > I m wondering since otv is not ieee if i got it well... > > So which is your suggestion for the lan and wan devices? > > Wan i understand 6800 or n7k ? > Lan? > > Rgds > > Sent with Mobile > > > -------- Messaggio originale -------- > Da: Andrew Miehs <[email protected]> > Data: > A: R LAS <[email protected]> > Cc: [email protected] > Oggetto: Re: [c-nsp] Best design can fit DC to DC > > > Dont know if you really want l2 spanning across 35km... > > The qfx5100s are an extremely cost effective solution. > > If you want mpls you would need c6800s or n7ks possibly using otv - this will > become very pricey very quickly... > > Sent from a mobile device > > > On 1 Nov 2014, at 3:43, R LAS <[email protected]> wrote: > > > > Hi all > > a customer of mine is thinking to renew DC infrastructure and > > interconnection among the main (DC1) and secondary (DC2), with the > > possibility in the future to add another (DC3). > > > > Main goal are: sub-second convergence in case of a single fault of any > > component among DC1 and DC2 (not DC3), to have the possibility to extend L2 > > and L3 among DCs, to provide STP isolation among DCs, to provide ports on > > the server at eth 1/10Gbs speed. > > > > DC1 and DC2 are 35 km away, DC3 around 1000 km away from DC1 and DC2. > > > > Customer would like to design using Cisco or Juniper and at the end to > > decide. > > > > Talking about Juniper my idea was to build and MPLS interconnection with > > MX240 or MX104 in VC among DC1 and DC2 (tomorrow will be easy to add DC3) > > and to use QFX in a virtual chassis fabric configuration. > > > > And if you would go with Cisco, what do you propose in this scenario ? > > > > Rgds > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
