[c-nsp] Cisco 3750-X Stack

[Chris Gotstein]

I setup and configured 3 3750-X switches in a stack for use in a video 
multicast environment.  This is a very basic config, using vlan's to 
separate traffic and IGMP v3 to control multicast.  Issue I'm running 
into is when a device is unplugged from a switch, then plugged back into 
either the same port or a different port on the same switch, the port 
will not come back up, Port status shows the port as down/down.  If you 
move the device to switch 2 in the stack, it will come up. We are 
running the latest version of IOS 150-2.SE7.

--
---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/