Chris, Can you post a port configuration? I have done quite a bit of regression testing of SE7 and have never seen this problem.
also what devices are you plugging in? laptop? Pc ? have you tried other device types? Adam. On 2 December 2014 at 02:17, Chris Gotstein <[email protected]> wrote: > I setup and configured 3 3750-X switches in a stack for use in a video > multicast environment. This is a very basic config, using vlan's to > separate traffic and IGMP v3 to control multicast. Issue I'm running into > is when a device is unplugged from a switch, then plugged back into either > the same port or a different port on the same switch, the port will not > come back up, Port status shows the port as down/down. If you move the > device to switch 2 in the stack, it will come up. We are running the latest > version of IOS 150-2.SE7. > > -- > ---- ---- ---- ---- > Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P. > http://uplogon.com | +1 906 774 4847 | [email protected] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
