tcam on asr1k is used just to filters/policies not to routing table, am I right?
- Roberto On Wed, Jan 14, 2015 at 1:52 PM, Lukas Tribus <[email protected]> wrote: >> Hello all >> >> I’ve been googling during a long time trying to find the maximum route >> table size of the Cisco ISR-4451-X but I can’t find it. >> >> I would need a BGP full routing table and many internal routes (probably >> more than 2.000). Bandwidth is not a problem, the estimation is about 500 >> Mbits/s. througput. >> >> Does someone knows these values? > > Its a software router (similar to ASR1k), you don't have a real TCAM. Make > sure > you have at least 8GB RAM and you should be good. > > > Lukas > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
