Chuck, > On 15 Jan 2015, at 13:06, Chuck Church <[email protected]> wrote: > > I took that as > meaning the % of BW against your ESP limit such as 5 gigabit in this case. > Our two I'm looking at (both running 3.7.4) look like this (bottom 3 lines): > > Total (pps) 344698 357155 334210 > 340850 > (bps) 2266105832 2329040800 2187654192 > 2239088888 > Processing: Load (pct) 4 5 4 > 4 > > The % listed is 4 or 5, yet the bps total seems to be about 2.2 gigabit, or > approaching half of what the ESP5 should be able of doing. Should I just > use the bps line and ignore the processing load line? I'm not sure what > it's indicating a percentage of. The total bps line matches up pretty well > with the 5 minute input count of all interfaces.
The processing load (percentage) is quite low, as ESP CPU may not be tasked with lot of things to do on the traffic itself. Depending on the features configured you may be either higher or lower. -- "There's no sense in being precise when | Łukasz Bromirski you don't know what you're talking | jid:[email protected] about." John von Neumann | http://lukasz.bromirski.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
