[c-nsp] IOS-XR 5.2 NG-MVPN

[Mihai]

Hello,

Could someone enlighten me why an ASR9k doesn't generate an I-PMSI in 
the below configuration? I am trying to configure a NG-MVPN between 
Cisco ASR9K and Juniper MX using RSVP-TE.

multicast-routing
 address-family ipv4
  mdt source Loopback10
  !
 !
 vrf mihai
  address-family ipv4
   mdt source Loopback10
   core-tree-protocol rsvp-te
   export-rt 200:200
   import-rt 200:200
   interface all enable
   bgp auto-discovery p2mp-te
    receiver-site
   !
   mdt default p2mp-te attribute-set p2mp-te-default-set
  !
 !
!
vrf mihai
 vpn id 200:200
 address-family ipv4 unicast
  import route-target
   200:200
  !
  export route-target
   200:200
  !
 !
!
router bgp 65100
 mvpn
 bgp router-id 2.2.2.2
 address-family vpnv4 unicast
 !
 address-family ipv4 mvpn
  global-table-multicast
 !
 neighbor 1.1.1.1
  remote-as 65100
  update-source Loopback10
  address-family vpnv4 unicast
  !
  address-family ipv4 mvpn
  !
 !
 vrf mihai
  rd 200:200
  address-family ipv4 unicast
   network 10.10.10.1/24
  !
  address-family ipv4 mvpn


RP/0/RSP0/CPU0:asr9k1(config)#do sh bgp ipv4 mvpn neighbors 1.1.1.1 
advertised-routes
Sat Feb 28 18:15:28.205 EETDST
RP/0/RSP0/CPU0:asr9k1(config)#


Juniper is advertising the I-PMSI:

RP/0/RSP0/CPU0:asr9k1(config)#do sh bgp ipv4 mvpn  | begin Distinguisher:
Sat Feb 28 18:14:24.500 EETDST
Route Distinguisher: 200:200 (default for vrf mihai)
*>i[1][1.1.1.1]/40
                      1.1.1.1               100      0 i
Route Distinguisher: 200:201
*>i[1][1.1.1.1]/40
                      1.1.1.1               100      0 i

Processed 2 prefixes, 2 paths

Thanks,
Mihai
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/