Hello Adam,
Unfortunately I can't use mLDP for this test because the activation of
mLDP will restart the LDP sessions (I don't use GR).
RPD_LDP_SESSIONDOWN: LDP session 1.1.1.1 is down, reason: received
unexpected EOF
I configured Lo10 under multicast routing but nothing has changed.
On 03/01/2015 03:04 AM, Adam Vitkovsky wrote:
Hello Mihai,
Just shooting in the dark,
I'd try enabling loopback 10 under multicast routing.
Oh and since Juniper supports mLDP for NG-MVPN why would you bother
enabling MPLS-TE?
adam
> -----Original Message-----
> From: cisco-nsp [mailto:[email protected]] On Behalf Of
> Mihai
> Sent: 28 February 2015 16:25
> To: [email protected] <mailto:[email protected]>
> Subject: [c-nsp] IOS-XR 5.2 NG-MVPN
>
> Hello,
>
> Could someone enlighten me why an ASR9k doesn't generate an I-PMSI in
> the below configuration? I am trying to configure a NG-MVPN between
> Cisco ASR9K and Juniper MX using RSVP-TE.
>
> multicast-routing
> address-family ipv4
> mdt source Loopback10
> !
> !
> vrf mihai
> address-family ipv4
> mdt source Loopback10
> core-tree-protocol rsvp-te
> export-rt 200:200
> import-rt 200:200
> interface all enable
> bgp auto-discovery p2mp-te
> receiver-site
> !
> mdt default p2mp-te attribute-set p2mp-te-default-set
> !
> !
> !
> vrf mihai
> vpn id 200:200
> address-family ipv4 unicast
> import route-target
> 200:200
> !
> export route-target
> 200:200
> !
> !
> !
> router bgp 65100
> mvpn
> bgp router-id 2.2.2.2
> address-family vpnv4 unicast
> !
> address-family ipv4 mvpn
> global-table-multicast
> !
> neighbor 1.1.1.1
> remote-as 65100
> update-source Loopback10
> address-family vpnv4 unicast
> !
> address-family ipv4 mvpn
> !
> !
> vrf mihai
> rd 200:200
> address-family ipv4 unicast
> network 10.10.10.1/24
> !
> address-family ipv4 mvpn
>
>
> RP/0/RSP0/CPU0:asr9k1(config)#do sh bgp ipv4 mvpn neighbors 1.1.1.1
> advertised-routes
> Sat Feb 28 18:15:28.205 EETDST
> RP/0/RSP0/CPU0:asr9k1(config)#
>
>
> Juniper is advertising the I-PMSI:
>
> RP/0/RSP0/CPU0:asr9k1(config)#do sh bgp ipv4 mvpn | begin Distinguisher:
> Sat Feb 28 18:14:24.500 EETDST
> Route Distinguisher: 200:200 (default for vrf mihai)
> *>i[1][1.1.1.1]/40
> 1.1.1.1 100 0 i
> Route Distinguisher: 200:201
> *>i[1][1.1.1.1]/40
> 1.1.1.1 100 0 i
>
> Processed 2 prefixes, 2 paths
>
> Thanks,
> Mihai
> _______________________________________________
> cisco-nsp mailing list [email protected]
<mailto:[email protected]>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
------------------------------------------------------------------------
This email has been scanned for email related threats and delivered
safely by Mimecast.
For more information please visit http://www.mimecast.com
------------------------------------------------------------------------
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
