On 5/May/15 14:41, Josh Baird wrote: > > > Can the CSR1000v handle a full routing table(s)? Any limitations that > I should be aware of when handling a full table and ~1gbps of traffic?
CSR1000v is 100% software, so you do not get FIB limitations. You need the right license to unlock RIB slots, however. We currently have a Premium license that gives us 500Mbps of throughput + 8GB of RAM. The 8GB of RAM is fully available for you to use to hold routes. The RAM also doubles as a place to hold FIB, so again, FIB slots are limited by RAM, not hardware. I know the latest IOS XE release for CSR1000v (3.15S, I think) supports up to 16GB of RAM, and up to 10Gbps of throughput. You can speak to your SE about the license matrix that gives you the best cost for RAM and throughput. 1Gbps of traffic through the box should be easy, provided your server can handle it. CSR1000v, itself, will not be the bottleneck, provided you have the right license. And I believe there is a 1Gbps throughput license. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
