Thanks - As per my last post, I tend to agree...on the ME's they are reporting as LH...only on the ASRs they are reporting as ZX.
So, it would "appear" that they are all LH....hopefully someone can confirm based of the TX/RX readings I provided? Cheers for all the responses....very helpful. ________________________________ From: Peter Persson <[email protected]> Sent: Monday, 6 July 2015 9:09 PM To: CiscoNSP List Cc: [email protected] Subject: Re: [c-nsp] SFPs (Third party) - ordered "standard" LH, but got "ZX" Hey, Its a pretty common behaviour since all machines read from different places on the EEP rom. Normally it is Cisco ASR that reports from a different place of EEP. The SFP is a LH/LX optics, but reports as a ZX. Example: NAME: "GigabitEthernet 0/7", DESCR: "1000BASE-ZX SFP" Optical Optical Temperature Voltage Current Tx Power Rx Power Port (Celsius) (Volts) (mA) (dBm) (dBm) --------- ----------- ------- -------- -------- -------- Gi0/7 41.9 3.29 18.9 -6.8 -- -4.4 2015-07-06 10:50 GMT+02:00 CiscoNSP List <[email protected]<mailto:[email protected]>>: Hi Everyone, As per title....ordered a bunch of our usual single mode SFP's. and they are badged as LH, but when inserted into router/switch, they report as ZX.....can I connect our LH to the new ZX ones (I dont have a router/switch handy to test), and have to ship them interstate.....but obviously dont want to if they are no compatible with our existing LH SFP's Cheers. _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
