> On 31 Jul 2015, at 4:08, Bala Subrahmanyam Venkata wrote:
>
> All-
>
> Is there a way to make IOS skip the check for RA (router-alert) option
> in RSVP Path message ? I have a router that's sending such Path
> messages and IOS is skipping with following error
>
> "Received PATH without Router-Alert option - ignoring"
RFC2205 for RSVP states that the Router Alert must be used for Path messages.
o Router Alert
RSVP must be able to cause Path, PathTear, and ResvConf
message to be sent with the Router Alert IP option.
RFC6398 does discuss considerations for using Router-Alert Options, but all
discussion in regards to RSVP state that RSVP is deployed within the same
administrative control/protected environment and no recommendation is made to
remove the must wording from RFC2205.
What version and router type is originating these Path requests?
Andy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
