On 07/30/2015 01:19 AM, Lukas Tribus wrote:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/bbdsl/configuration/xe-3s/asr1000/bba-xe-3s-asr1000-book/bba-ppoe-ses-q-rad-xe.html
Which basically boils down to:
The following AV-pairs define the QoS policy to be applied dynamically to the
session:
"ip:sub-qos-policy-in=<name of the QoS policy in ingress direction>"
"ip:sub-qos-policy-out=<name of egress policy>"
You need to configure the policy-maps on the box first, obviously.
Right, the rub is 'configure the policy maps', which is what I started
with. Then there are the control policies and the service policies and
the lack of any explanation, because it all has to work %100 before any
of it can work, at least in my extensive testing. Somone graciously
supplied a working example for access rate limiting which was easy
enough to do. More sophisticated queuing and shaping still is elusive -
do you have any examples of QoS that you can share?
Mike-
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
