Hi Everybody
Recently, we purchased ASR920. We want to establish L2VPN connection between
this router and other PE router which is Cisco.
IP/Routing and MPLS is fine. L2VPN connection is established but there is an
issue.
The traffic does not enter L2VPN but it exits it when it is sent by remote
PE.
I used this configuration on ASR920:
interface GigabitEthernet0/0/4
no ip address
media-type auto-select
negotiation auto
service instance 1 ethernet
encapsulation dot1q 2631
rewrite ingress tag pop 1 symmetric
xconnect 10.234.233.29 2631 encapsulation mpls
And this what I have when CE on remote PE pings CE on ASR:
ASR920#show mpls l2transport vc detail | include totals
transit packet totals: receive 9, send 0
transit byte totals: receive 828, send 0
I hope you can help me in this regard
Thank you
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
