--- Begin Message ---
Hi Michael,

Both of those options are quite probably overkill for what you've described. If 
a 2811 is currently doing what you need in the deployment and the only change 
is an increase in speed, just go with the next step up. For what you've 
described a 2911 would easily fit what you want and I imagine it would be a lot 
cheaper than either ISR4000 or ARS920. Depends whether you want something new 
and shiny or something that will just get the job done. If you want to purchase 
a router now for some future upgrade, then you'd have to take a stab at what 
you think the upgrade might be and when you think it might happen and then 
purchase something that you think might be sufficient for that.

Our current rollout guidelines (internally) suggest 2911 is good for around 
120-150mbps. For up to 250-300mbps we use 3925. Anything higher speed than that 
is evaluated individually.

Best of luck with your upgrade :)


regards,
Tony.



----- Original Message -----
From: Michael Malitsky <[email protected]>
To: "[email protected]" <[email protected]>
Cc: 
Sent: Tuesday, 22 September 2015, 10:52
Subject: [c-nsp] ASR920 vs ISR4000

I need to upgrade the edge router for one of my deployments.  Current 2811 is 
not expected to support the new WAN links.  I need 4-5 ports (copper is fine), 
aggregate throughput up to 125Mb (not accounting for future growth), BGP with 
3-5 peers and <100 routes, and QoS.  I don't ever expect to support telephony 
or MPLS.  Cisco's suggestion is to use an ISR4331.

The question is whether I should also consider an ASR920 for this role?  I've 
seen it mentioned on this list a few times.  It looks like both will fill my 
basic requirements, price points are similar, and both run IOS-XE.  The ISR's 
performance is capped at 300Mb, and I can add a small number of ports.  The 
ASR's performance is essentially unlimited, and I can add more ports (by 
purchasing licenses).  The ISR will do encryption if I ever need it, in 
software only, and the ASR will not.

Are there any major differences I am missing?  Any first-hand experiences would 
be especially appreciated.

Sincerely,
Michael

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

--- End Message ---
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to