Oh this is good info... So if I was thinking about clustering a couple asr9001's for various reasons, CG NAT could not be one of those reasons. Right ?
So I could potentially cluster a couple asr9006's together and include cgnat as one of the things to do on that cluster. Aaron -----Original Message----- From: Nick Hilliard [mailto:[email protected]] Sent: Tuesday, September 29, 2015 7:20 AM To: Aaron; 'quinn snyder'; [email protected]; 'Pshem Kowalczyk' Subject: Re: [c-nsp] PE NAT / VRF Aware NAT on PE nat is only supported on the asr9000 chassis (i.e. not asr9001) with the CGN card. it's not cheap. Nick On 29/09/2015 13:17, Aaron wrote: > Thanks, I have a 20 gig ASR9k ring, about 15 nodes... what about doing > NAT there on one or a couple of the asr9k's ? > > Aaron > > > -----Original Message----- > From: quinn snyder [mailto:[email protected]] > Sent: Monday, September 28, 2015 10:35 PM > To: Aaron > Subject: Re: [c-nsp] PE NAT / VRF Aware NAT on PE > > you'll need to move to asr1k as pe. if you read up on vasi interfaces > -- they really fit the bill here -- as you can nat and impose labels > on a single operation without having to recirculate through the qfp. > > also -- they have much higher throughout than an isr4k or so. > > q. > > -- > quinn snyder | [email protected] > > -= sent via iphone. please excuse spelling, grammar, and brevity =- > >> On Sep 28, 2015, at 19:36, Aaron <[email protected]> wrote: >> >> Thanks >> >> >> >> ASR920 ? >> >> >> >> Aaron >> >> >> >> From: Pshem Kowalczyk [mailto:[email protected]] >> Sent: Monday, September 28, 2015 8:50 PM >> To: Aaron; [email protected] >> Subject: Re: [c-nsp] PE NAT / VRF Aware NAT on PE >> >> >> >> Hi, >> >> >> >> ME3600 does not support NAT. >> >> >> >> kind regards >> >> Pshem >> >> >> >> >> >> On Tue, 29 Sep 2015 at 14:46 Aaron <[email protected]> wrote: >> >> Anyone know how to do PE NAT / VRF Aware over MPLS L3VPN on an ME3600 ? >> >> >> >> I edge in ip traffic on ME3600's as the PE to MPLS L3VPN. >> >> >> >> I was wanting to make the customer-facing port of the ME3600 as the >> ip nat inside port, but I don't know how / what would be the ip nat >> outside interface since it's all mpls at that point. >> >> >> >> Anyone have a config or a link to a website explain the logic and >> config behind this idea? >> >> >> >> Aaron >> >> >> >> >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
