Amos, I have covered this in my ME3600X Cisco Live San Francisco session. The session deck is available at the following location. http://www.warisinfo.com/my-presentations
Best Regards, [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Routing Segment [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> on behalf of Amos Thong <[email protected]<mailto:[email protected]>> Date: Thursday, October 29, 2015 at 11:08 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [c-nsp] L2VPN Ingress Policing on ME3600 Hi All, Can any share if a L2VPN ingress policing on a ME3600, is doing accounting at L1 or L2 frame ? (a) L2 Frame ( aka MEF service frame ) without the "Inter-Frame Gap" and "Preamble & Start of Frame" (b) L1 Frame ( aka 802.3 frame ) that is inclusive of "Inter-Frame Gap" and "Preamble & Start of Frame" Input is appreciated. Typical config is as follow. Regards Amos interface GigabitEthernet0/1 description l2vpn:customer switchport trunk allowed vlan none switchport mode trunk mtu 9178 no cdp enable hold-queue 2000 in service instance 1 ethernet description l2vpn:customer encapsulation dot1q 1000 rewrite ingress tag pop 1 symmetric service-policy input CUSTOMER-QOS-IN-L2VPN-6M service-policy output CUSTOMER-QOS-OUT-L2VPN-6M bridge-domain 1000 interface Vlan1000 description l2vpn:customer mtu 9178 bandwidth 6000 no ip address no ip redirects no ip unreachables no ip proxy-arp xconnect 223.28.0.41 5053 encapsulation mpls pw-class eompls-interworking-ethernet hold-queue 2000 in end _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
