On 16/Nov/15 11:00, Alex K. wrote:
> Hello everyone, > > I'm having a little bit of problem, trying to figure out which multicast > VPN solution will interoperate on both vendors. > > It's seems quite certain to me, that both vendors are implementing > draft-rosen (aka dual PIM), but to my knowledge, there're more advanced > solutions nowadays - namely, M-LSP & RSVP-TE > > (both for setting up P2MP LSPs used for multicast actual forwarding, *not* > in the TE sense of word). > > Anyhow, there's no clear explanation on each side, which draft a > *particular CLI* is referencing to (i.e. implementing). > > Any recommendations regarding working, interoperable mVPN solution, will be > gladly appreciated! Both Cisco and Juniper now support NG-MVPN harmoniously. Be it p2mp RSVP-TE- or mLDP-based tunnels. I'd recommend that over Rosen, particularly if you run an MPLS network. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
