> On Nov 19, 2015, at 18:14, CiscoNSP List <[email protected]> wrote: > > > Thanks for clarifying Quinn - So on a pair of 3Ks, a "typical" VPC setup > would be 2 x 10Gb links + "a" link(i.e. Management ports) for the keepalives? > > And on a pair of 9Ks, 2 x 40Gb links, plus management port link?
not so much typical as 'sized for your use case'. during failure scenarios, it is possible to have traffic transit the peer-link. however -- it comes down to understanding your environment, sla, redundancy, etc. while the minimum recommended links is (2) for the peer-link, this can scale and you'll need to dial this in for your situation. playing in the lab and running through a reflective set of test cases is your best bet here. obviously -- you'll need to extrapolate this to being under load as well. q. -- quinn snyder | [email protected] -= sent via iphone. please excuse spelling, grammar, and brevity =- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
