We apply outbound bandwidth shaping to nearly all our service instances on ME3600's without issue...perhaps sharing the error you are getting would help? (And full qos policy)
Cheers ________________________________ From: Mohammad Khalil <[email protected]> Sent: Thursday, 21 January 2016 8:17 PM To: CiscoNSP List; [email protected] Subject: RE: [c-nsp] MPLS EXP QOS I got multiple errors , error in applying service-policy , bandwidth is not supported in the outbound direction (which am aware of) > From: [email protected] > To: [email protected]; [email protected] > Subject: Re: [c-nsp] MPLS EXP QOS > Date: Thu, 21 Jan 2016 08:28:27 +0000 > > >and the other one is ME3600X , my termination with my neighbor is interface > >Vlan (SVI) , when I tried to apply the configuration on the ME3600X box > >interface Vlan x > >service-policy output POLICY > >I got prompted with error in applying QoS > > > Are you using service instances under physical Int? If so, Apply the service > policy to the service instance...i.e. > > > service instance 1007 ethernet > > encapsulation dot1q 1007 > > rewrite ingress tag pop 1 symmetric > > service-policy output FOO_BAR_20MB > > > then vlan int just has vrf (If using one) and L3 conf etc > > > HTH _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
