Thanks for the answer Another question. If we use 6716 or 6748 then will Fabric Switch be 80Gbps or not for these cards as well? On Jan 27, 2016 5:36 AM, "Paul" <[email protected]> wrote:
> 1. yes in 11 slots > 2. yes > 3. 6708 does not have DFC4 or CFC modes, so is not compatible with sup2t, > you can use ws-6908-10g > 4. yes > > see documentation config notes: > > http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Config_Notes/OL_24918.pdf > > > On 1/22/2016 2:18 AM, Alireza Soltanian wrote: > >> Hi Everybody >> >> I have some questions about Module setup on Cisco 6513-E >> >> 1- As far as I understood, If we use SUP-2T on C6513-E, the Fabric Switch >> Capacity will be 80Gbps(2x40Gbps Channels). Is this correct? >> 2- We can install WS-x6748-SFP on this setup with DFC4. Is this Correct? >> 3- Can we install WS-x6708-10G on this setup with DFC4 or Not? >> 4- If no then can we use WS-x6716-10G with DFC4? >> >> Thank you for your help and support >> Alireza >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> > -- > GloboTech Communications > Phone: 1-514-907-0050 x 215 > Toll Free: 1-(888)-GTCOMM1 > Fax: 1-(514)-907-0750 > [email protected] > http://www.gtcomm.net > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
