Only 69xx modules are 40 or more per channel, all the 67xx and the
upgraded 67xx ones with dfc4 (rebadged to 68xx) will still be 20 per
channel, the DFC does not matter, the fabric asic and hardware on the
older modules is all 20g per channel (40g total on dual channel cards)
On 1/26/2016 10:24 PM, Alireza Soltanian wrote:
Thanks for the answer Another question. If we use 6716 or 6748 then
will Fabric Switch be 80Gbps or not for these cards as well?
On Jan 27, 2016 5:36 AM, "Paul" <[email protected]
<mailto:[email protected]>> wrote:
1. yes in 11 slots
2. yes
3. 6708 does not have DFC4 or CFC modes, so is not compatible with
sup2t, you can use ws-6908-10g
4. yes
see documentation config notes:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Config_Notes/OL_24918.pdf
On 1/22/2016 2:18 AM, Alireza Soltanian wrote:
Hi Everybody
I have some questions about Module setup on Cisco 6513-E
1- As far as I understood, If we use SUP-2T on C6513-E, the
Fabric Switch
Capacity will be 80Gbps(2x40Gbps Channels). Is this correct?
2- We can install WS-x6748-SFP on this setup with DFC4. Is
this Correct?
3- Can we install WS-x6708-10G on this setup with DFC4 or Not?
4- If no then can we use WS-x6716-10G with DFC4?
Thank you for your help and support
Alireza
_______________________________________________
cisco-nsp mailing list [email protected]
<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
GloboTech Communications
Phone: 1-514-907-0050 x 215 <tel:1-514-907-0050%20x%20215>
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750 <tel:1-%28514%29-907-0750>
[email protected] <mailto:[email protected]>
http://www.gtcomm.net
--
GloboTech Communications
Phone: 1-514-907-0050 x 215
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750
[email protected]
http://www.gtcomm.net
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
