Even on 9.1 - same limit: mpf-policy-map-class mode commands/options: <64000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000
This command is not supported on the X models at all. -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Artem Viklenko Sent: 14 March 2016 07:53 To: [email protected] Subject: [c-nsp] ASA 5520 shaper > 150Mbps Hi, All! ASA 5550 with Cisco Adaptive Security Appliance Software Version 8.2(5)59 Trying to shape outgoing traffic on ~290Mbps (upstream provides 300Mbps). But ASA allows only: ASA1(config-pmap-c)# shape average ? mpf-policy-map-class mode commands/options: <64000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000 Is it possible to set shaper bigger than 150Mbps at all? Thanks in advance! -- Regards! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
