2016-03-14 13:09, Nick Cutting написав:
Even on 9.1 - same limit:
mpf-policy-map-class mode commands/options:
<64000-154400000> Target Bit Rate (bits per second), the value
needs to be multiple of 8000
This command is not supported on the X models at all.
Thanks Nick!
I know that shaping supported only on single-core cpu platforms.
-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf
Of Artem Viklenko
Sent: 14 March 2016 07:53
To: [email protected]
Subject: [c-nsp] ASA 5520 shaper > 150Mbps
Hi, All!
ASA 5550 with Cisco Adaptive Security Appliance Software Version
8.2(5)59
Trying to shape outgoing traffic on ~290Mbps (upstream provides
300Mbps).
But ASA allows only:
ASA1(config-pmap-c)# shape average ?
mpf-policy-map-class mode commands/options:
<64000-154400000> Target Bit Rate (bits per second), the value
needs
to be
multiple of 8000
Is it possible to set shaper bigger than 150Mbps at all?
Thanks in advance!
--
Regards!
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
