hey,
interface BVI60004
ipv4 address 10.4.5.1 255.255.255.0
ipv4 verify unicast source reachable-via rx allow-self-ping
Is this actual config or simplified? If simplified, is there VRRP/HSRP
involved?
If there is, it can be explained by DHCP return packet hitting other
router (because it's sent to GIADDR but you only announce your connected
prefix). Other router then fails to send packet to original router via
connected interface because from other routers POV it fails RPF (saddr:
dhcp-server, daddr: giaddr).
--
tarko
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
