Hi Saku,
On the 6708 linecard The fabric asic has 20G and these combine two
pairs: 1,4,5,7 and 2,4,6,8 Traffic between ports in these groups does not go
over the fabric and is not counted against that BW, what about traffic between
groups exemple from port 1 to port 2 in same linecard does go over the fabric
?
Br.
KAYSSAR BEN HAMMADI
IP Technical Manager
CCIE (#48406), JNCIE-M (#471), JNCIE-SP (#1147)
Mobile : +216 29 349 952 / +216 98 349 952
-----Original Message-----
From: Saku Ytti [mailto:[email protected]]
Sent: Thursday, June 02, 2016 9:46 AM
To: Ben Hammadi, Kayssar (Nokia - TN/Tunis) <[email protected]>
Cc: [email protected]
Subject: Re: [c-nsp] 6509 weird pps value
On 2 June 2016 at 11:41, Ben Hammadi, Kayssar (Nokia - TN/Tunis)
<[email protected]> wrote:
> The amount of Traffic that cross the fabric can be seen via " show
> fabric utilization " , what about the local switched traffic inside the same
> channel , how we can check the amount ?
To my knowledge there is no command.
--
++ytti
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
