There is no way to check the load directly. You simply calculate the combined bw of the two ports and that will give you the amount of traffic. Divide by 16G and that will give you the decimal version of percent.
Mack McBride | Senior Network Architect | ViaWest, Inc. O: 720.891.2502 | C: 303.720.2711 | [email protected] | www.viawest.com -----Original Message----- From: Ben Hammadi, Kayssar (Nokia - TN/Tunis) [mailto:[email protected]] Sent: Monday, June 06, 2016 6:01 AM To: Mack McBride; Saku Ytti Cc: [email protected] Subject: RE: [c-nsp] 6509 weird pps value Thanks Mack, I already check this post , do you confirm that there is no way to check the load on the FPGA that connect port pairs as SAKU said ? Br. KAYSSAR BEN HAMMADI IP Technical Manager CCIE (#48406), JNCIE-M (#471), JNCIE-SP (#1147) Mobile : +216 29 349 952 / +216 98 349 952 This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
