I see the main difference between the two is the 32 bit OS vs a 64 bit and 1.5 single core vs a 2.2 dual core. Yes the memory is increased and hard drive space.
If a 1006 will be used for some DS1 and Ethernet termination would an RP1 be enough? I could also do with an ESP20 and SIP10s since they allow for 2:1 oversubscription and do not think I will hit the 2:1 in the foreseeable near future. As far as network services: BFD on selective peers BGP on above selective peers Three copies of the Internet routing table (one from each route reflector) Some QOS Curtis _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/