Do you have urpf (loose) enabled? Job
Original Message From: Hank Nussbacher Sent: maandag 6 juni 2016 14:10 To: c-nsp Subject: [c-nsp] Bug in stat counters with VLANs? Running IOS-XR v.5.1.3 on ASR9010 and the "show interface" stats for sub-VLANs seems to be totally off: TenGigE0/1/1/7 is up, line protocol is up 30 second input rate 6689925000 bits/sec, 738298 packets/sec 30 second output rate 1330888000 bits/sec, 396078 packets/sec TenGigE0/1/1/7.333 is up, line protocol is up 30 second input rate 9324818000 bits/sec, 1133227 packets/sec 30 second output rate 1273437000 bits/sec, 355218 packets/sec TenGigE0/1/1/7.100 is up, line protocol is up 30 second input rate 4164891000 bits/sec, 354715 packets/sec 30 second output rate 80678000 bits/sec, 47826 packets/sec Shouldn't the 2 VLANs total the same amount as the primary interface? Is there a bugid for this issue? Thanks, Hank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
