On 06/06/2016 15:14, Job Snijders wrote: > Do you have urpf (loose) enabled? Bingo!
Thanks, Hank > > Job > > Original Message > From: Hank Nussbacher > Sent: maandag 6 juni 2016 14:10 > To: c-nsp > Subject: [c-nsp] Bug in stat counters with VLANs? > > Running IOS-XR v.5.1.3 on ASR9010 and the "show interface" stats for > sub-VLANs seems to be totally off: > > TenGigE0/1/1/7 is up, line protocol is up > 30 second input rate 6689925000 bits/sec, 738298 packets/sec > 30 second output rate 1330888000 bits/sec, 396078 packets/sec > > TenGigE0/1/1/7.333 is up, line protocol is up > 30 second input rate 9324818000 bits/sec, 1133227 packets/sec > 30 second output rate 1273437000 bits/sec, 355218 packets/sec > > TenGigE0/1/1/7.100 is up, line protocol is up > 30 second input rate 4164891000 bits/sec, 354715 packets/sec > 30 second output rate 80678000 bits/sec, 47826 packets/sec > > Shouldn't the 2 VLANs total the same amount as the primary interface? > Is there a bugid for this issue? > > > Thanks, > Hank > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
