Hello, Quite the curious case here. An ASR9000 router has two VRFs.
For simplicity sake let's call them VRF A and VRF B. VRF A and VRF B need to be able to see each other's routes via importing and exporting however here's the catch. I need VRF A to see VRF B's routes and vice versa but with prepends. Basically when VRF A's routes are imported into VRF B they need to look farther away and vice versa. All PE routers that have VRF A need to see routes that belong to it unaltered and PE routers that have VRF B need to see routes that belong to it unaltered. I tried to prepend based on matching an RD set within the import and/or export statements but I get the error "Policy [XYZ] uses 'rd rdmatch'. 'in' is not a valid operate for the 'rd' attribute at the bgp import attach point. I know I can hair pin two ports on ASR9000 and run eBGP across them using the local-AS command and exchange routes between VRFs that way. Thanks Curtis _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
