My issue with using VASI interaces is that I do not have a MSB card. On Jun 14, 2016 9:11 PM, "Steve Dodd" <[email protected]> wrote:
> This seems like a good use case for VASI interfaces. > > Thanks, > Steve > > On 6/14/16, 3:22 PM, "cisco-nsp on behalf of Curtis Piehler" > <[email protected] on behalf of [email protected]> > wrote: > > >Hello, > > > >Quite the curious case here. An ASR9000 router has two VRFs. > > > >For simplicity sake let's call them VRF A and VRF B. > > > >VRF A and VRF B need to be able to see each other's routes via importing > >and exporting however here's the catch. > > > >I need VRF A to see VRF B's routes and vice versa but with prepends. > >Basically when VRF A's routes are imported into VRF B they need to look > >farther away and vice versa. All PE routers that have VRF A need to see > >routes that belong to it unaltered and PE routers that have VRF B need to > >see routes that belong to it unaltered. > > > >I tried to prepend based on matching an RD set within the import and/or > >export statements but I get the error "Policy [XYZ] uses 'rd rdmatch'. > >'in' is not a valid operate for the 'rd' attribute at the bgp import > >attach > >point. > > > >I know I can hair pin two ports on ASR9000 and run eBGP across them using > >the local-AS command and exchange routes between VRFs that way. > > > >Thanks > > > >Curtis > >_______________________________________________ > >cisco-nsp mailing list [email protected] > >https://puck.nether.net/mailman/listinfo/cisco-nsp > >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
