Hello, If you hve SNMP write access, you can push a config file to your router with the access-list you want to create or modify. The config file could be dowloaded by the router via TFTP.
http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/7910-11-7910.html#copying2 # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - # - - Nicolas KARP # - - Network and Security Engineer # - - Email : [email protected] <[email protected]> # - - Linkedin : http://www.linkedin.com/in/nicolaskarp # - - Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp <http://www.viadeo.com/fr/profile/nicolas.karp%20> # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2016-07-12 14:59 GMT+02:00 Mohammad Khalil <[email protected]>: > Check the below link , it might help you > https://supportforums.cisco.com/discussion/10732136/snmp-modify-or-add-acl > > BR, > Mohammad > > > Date: Tue, 12 Jul 2016 15:37:37 +0300 > > From: [email protected] > > To: [email protected] > > Subject: [c-nsp] Modify access list via SNMP > > > > Hi, > > > > We have ASR 1002 and i want modify access list (add\remove entries) > > via SNMP, this is possible yet? Can someone show me links where i can > > get info about this. If you have some examples this will be good also. > > Thanks. > > > > Regards, > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
