Hi i have a big problems with one cisco 3750 :
Jul 12 17:30:36.218: %PM-4-ERR_DISABLE: channel-misconfig error detected on Gi1/0/1, putting Gi1/0/1 in err-disable state Jul 12 17:30:36.856: %PM-4-ERR_DISABLE: channel-misconfig error detected on Po1, putting Gi1/0/1 in err-disable state Jul 12 17:30:36.856: %PM-4-ERR_DISABLE: channel-misconfig error detected on Po1, putting Po1 in err-disable state The port is in err-disable regularly .. a shut and no shut that's restart C3750#sh errdisable detect ErrDisable Reason Detection Mode ----------------- --------- ---- arp-inspection Enabled port bpduguard Enabled port channel-misconfig Enabled port community-limit Enabled port dhcp-rate-limit Enabled port dtp-flap Enabled port gbic-invalid Disabled inline-power Enabled port invalid-policy Enabled port l2ptguard Enabled port link-flap Enabled port loopback Enabled port lsgroup Enabled port mac-limit Enabled port pagp-flap Enabled port port-mode-failure Enabled port psecure-violation Enabled port/vlan security-violation Enabled port sfp-config-mismatch Enabled port small-frame Enabled port storm-control Enabled port udld Enabled port vmps Enabled port there is a solution to disable the errdisable on this type of switch? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
