The other issue is that you mentioned that the RPs have different versions of code. They should be running the same version otherwise the the line cards have to download the code..
On Tue, Aug 2, 2016 at 6:01 AM, murchison link <[email protected]> wrote: > Lukas, > thank you very much. > > On Tue, Aug 2, 2016 at 5:44 PM, Lukas Tribus <[email protected]> wrote: > > > > RPR: standby RP is partially initialised. That is, only the > > startup-config > > > of the active router and standby router are sync'ed. > > > > Correct. > > > > > > > I lost about 1 or 2 minutes of pings during this stage, then RP1 > > stabilised > > > and the pings started going through. > > > > > > Is this expected behaviour? > > > > Yes. You just said it yourself: RPR only sync's the startup > configuration, > > meaning that a "switchover" (which actually isn't a switchover) will > reload > > both RP's. > > > > > > > Also, why would anyone use RPR over SSO? > > > > RPR: RP redundancy (not a switchover) > > SSO: stateful switchover > > > > > > You can use RPR (which again, is not a switchover) if you have a problem > > with SSO. For example if you have reason to believe that an inconsistency > > (due to a bug) may spread to the secondary RP due to stateful > > synchronization, and you don't need an actual switchover (but only hw > > redundancy). > > > > We have some ancient GSR12k as P (therefor no customers are connected to > > those boxes) with dual RP configured in RPR, because we don't care about > > stateful switchover, as there are backup paths around the box. We do want > > the box to come back after a few minutes if there is a hardware failure > > though. > > > > > > On a box with single homed customers connected to it I would always run > > SSO. > > > > > > > > Regards, > > > > Lukas > > > > > > -- > regards, > Prakash Ganesh > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
