Pete, Does that mean i can upgrade 5548UP from 5.0.3 to 7.0.1 directly without any issue, is that right?
We have standalone switch (non-production) On Wed, Aug 3, 2016 at 12:33 PM, Pete Templin <[email protected]> wrote: > http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/notes/7x/Nexus5500_Release_Notes_7x.html#pgfId-428008 > > Looks like your 5548 is supported. Upgrade path suggests that you can do an > ISSU; if they're non-production, I'd just change the boot variables, reload, > then run 'install all ...' to ensure the little things are properly synced > up. > > > On 8/3/2016 9:21 AM, Satish Patel wrote: >> >> Pete, >> >> It was typo, I have corrected my switch model is Cisco Nexus 5548UP-FA. >> >> In google search some people saying you can directly go to 5.x to 7.x >> is you don't care about ISSU. but i didn't find that in Cisco doc. >> >> On Wed, Aug 3, 2016 at 12:15 PM, Pete Templin <[email protected]> >> wrote: >>> >>> The documents aren't hard to understand. I found the release notes for >>> NXOS >>> 7.0.1 within the Nexus 5000 family and see no mention of a 5448 under the >>> list of supported hardware, so it would appear that it's not supported. >>> >>> >>> >>> On 8/3/2016 8:53 AM, Satish Patel wrote: >>>> >>>> Problem is we don't have cisco support on that switch and it's not in >>>> production also so i have time to play with it before i move it to >>>> production. I tried to find but didn't get specific details, as you >>>> know cisco documents are not easy to understand they have tons of >>>> series and convoluted :( >>>> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
