--- Begin Message ---
can any one help  please
Tried moving in different slots
earlier broken module was working fine with the same chassis. 
Copyright (c) 2003 by cisco Systems, Inc.C7200 platform with 1048576 Kbytes of 
main memory

Readonly ROMMON initialized
Self decompressing the image : 
##################################################################################
 [OK]
%PA-3-NOTSUPPORTED: PA in slot2 (Unknown (type 850)) is not supported on this 
image.           Please issue "show diag" in fully loaded IOS image           
to get the PA's information and verify if it is supported           by this 
image, a newer version may be needed.%PA-3-DEACTIVATED: port adapter in bay [2] 
powered off. Nareshchandra Paturi 

    On Saturday, October 1, 2016 12:57 AM, naresh reddy via cisco-nsp 
<[email protected]> wrote:
 

 Dong a break fix for a faulty pa module getting unsupportable error, earlier 
the  broken PA was working fine
ROM: System Bootstrap, Version 12.3(4r)T1, RELEASE SOFTWARE (fc1)BOOTLDR: Cisco 
IOS Software, 7200 Software (C7200-KBOOT-M), Version 15.2(4)M9, RELEASE 
SOFTWARE (fc2)
Router uptime is 6 minutesSystem returned to ROM by reload at 10:00:48 UTC Fri 
Sep 30 2016System restarted at 10:02:48 UTC Fri Sep 30 2016System image file is 
"disk2:c7200-itpk9-mz.124-15.SW.bin"Last reload reason: Reload Command
 Router#sh diagSlot 3:        PA-MCX-8TE1-M Port adapter, 8 ports        Port 
adapter is analyzed        Port adapter insertion time 00:25:53 ago        
EEPROM contents at hardware discovery:        Hardware Revision        : 3.0    
    PCB Serial Number        : JAE11473VVU        Part Number              : 
73-7263-03        Board Revision           : C0        RMA Test History         
: 00        RMA Number               : 0-0-0-0        RMA History              
: 00        Deviation Number         : 0-0        Product (FRU) Number     : 
PA-MCX-8TE1-M        Top Assy. Part Number    : 800-17802-06        CLEI Code   
             : CNUIAW1AAA        Version Identifier       : V02        EEPROM 
format version 4        EEPROM contents (hex):          0x00: 04 FF 40 03 52 41 
03 00 C1 8B 4A 41 45 31 31 34          0x10: 37 33 56 56 55 82 49 1C 5F 03 42 
43 30 03 00 81          0x20: 00 00 00 00 04 00 80 00 00 00 00 CB 94 50 41 2D   
       0x30: 4D 43 58 2D 38 54 45 31 2D 4D 20 20 20 20 20 20          0x40: 20 
C0 46 03 20 00 45 8A 06 C6 8A 43 4E 55 49 41          0x50: 57 31 41 41 41 89 
56 30 32 20 FF FF FF FF FF FF          0x60: FF FF FF FF FF FF FF FF FF FF FF 
FF FF FF FF FF          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Nareshchandra Paturi
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

   

--- End Message ---
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to