On Sun, Oct 02, 2016 at 09:32:20AM -0400, nareshbtech--- via cisco-nsp wrote: > Yes it is a new hardware revision [for PA-MCX-8TE1-M] > The oldones are 2.0 which are working > The new one is 3.0 which isint
Based on past experiance, most likely you need a newer IOS version. Since most Cisco docs on the 7200 are dated like 2006 now describing 12.2S and the like and they seem to want to forget about it ever existing, I can't find anything on requirements in any of the datasheets like they used to update quite religiously. Of course, it could possibly be bad too, but Cisco did have to rollout new IOS versions for new hardware from time to time. They did usually make sure to give it a good buffer, but with the 7200 fading from history, it could even be a special point release that you'd have to talk to Cisco TAC about. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
