Could it be the "A @42V" value? What kind of circuits do you have for
each PSU? The 6000W can either take two 120V-20A or a single 240V-20A
if you need the full 6000W.
On 3/14/2017 5:42 AM, James Bensley wrote:
On 13 March 2017 at 15:02, "Rolf Hanßen" <[email protected]> wrote:
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-6000W 5771.64 137.42 OK OK on
2 WS-CAC-6000W 3780.00 90.00 - - off
Why is one of these 6kW PSUs saying 4kW of power capacity? Since they
are the same model PSU I think the power capacity has to match on
them?
Cheers,
James.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
