Yes !!! it works !!! thank u very much
El 21/09/17 02:20, James Bensley escribió:
On 20 September 2017 at 22:52, Alejandro Aristizabal
<aaristiza...@mediacommerce.net.co> wrote:
how can I fix this issue ???
As I said before...
On 20/09/17 11:19, James Bensley wrote:
You can try and move the neighbor statement from the VFI to under your
bridge domain config, I believe that creates a targeted (p2p) LDP
session which might "trick" the 6500 into thinking this is just a
vanilla Martini draft pseudowire.
So can you try and change you config from this ...
l2vpn
xconnect group PRUEBA
p2p ENSAYO
interface GigabitEthernet0/0/0/2.70
neighbor 172.31.171.254 pw-id 70
To this..
l2vpn
!
no xconnect group PRUEBA
!
bridge group BG_MST_VALLE
bridge-domain BD_MST-VALLE-VLAN-70
interface GigabitEthernet0/0/0/2.70
neighbor 172.31.171.254 pw-id 70
Cheers,
James.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/